Product main image

APRILIA Tuono 1000 R Factory IXU27 IRIDIUM (DCPR9EIX,VX)

Quick overview
IXU27 IRIDIUM (DCPR9EIX,VX)

IRIDIUM POWER SPARK PLUGS

For riders that care about performance.By using a 0.4mm diameter iridium alloy center electrode and a special ground electrode, IRIDIUM POWER realizes spark performance unseen until now.It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs.

Specifcations Include:
*A terminal nut is attached that fits with most of the world’s spark plug cables. Please remove the nut for installations that do not require one. (The terminal nuts on the IWM and IK-G types are solid parts and cannot be removed.)Built-in, Highly Reliable Resistor
*All IRIDIUM POWER plugs include a highly reliable, 5,000 ohm monolithic resistor specification to reduce electromagnetic noise that may affect electronic devices. (For all plug types)
*Highly Corrosion Resistant, Burnished Nickel PlatingThe plug housing is plated with burnished nickel, the same as plugs used for racing. It is highly resistant to corrosion and rust even while touring in continually rainy weather and during motocross events. (Low-heat range types excluded)
*360° Laser WeldingThe process used to mount the iridium tip is a highly reliable “All-around Laser Welding” process that is able to withstand all kinds of driving conditions. (For all plug types)
*Projected Center ElectrodeIn order to improve ignitability, the center electrode protrudes more than with conventional type plugs. This improves both acceleration response time and performance.(Only with: IU31, IUH24, IUH27, IX22, IX24, IX27, IUF22, IUF24, IWF22, IWF24, IWF27, IW24, IW27, IW29, IW31, and IW34)
*0.4 mm Diameter Ultra-?ne Iridium Center ElectrodeUsing a new iridium alloy with a very high melting point, the tip of the electrode can be made very fine. This enables the reduction of voltage necessary to cause the spark, and greatly improves ignitability. Moreover, the special iridium alloy used was developed by DENSO
*Taper-cut Ground ElectrodeThe tip of the ground electrode is cut to a fine taper to reduce the adverse effects of quenching, which greatly improves fuel ignitability. Also, because of the streamlined, taper-cut shape, the fuel-air mixture spreads more evenly in the gap, resulting in steady, reliable igniting of combustion.(excluding IUF27A, IUF31A, IU24A, IU27A, IU31A, IY24, IY27 & IY31)
*U-Groove Ground ElectrodeThe U-shaped groove on the ground electrode insures that the inside surface area is large enough to generate the flame kernel. This shape enables lower voltage needed to cause the spark and results in excellent ignitability without increasing the size of the spark gap. (excluding IUF27A, IUF31A, IU24A and IU31A)
*Insulator ProjectionThe projection of the insulator is optimally designed based on each plug's thermal value. This corresponds to requirements unique to thermal value, such as self-cleaning ability at lower thermal values, and heat resistance at higher thermal values. (For all plug types)

Description
IXU27 IRIDIUM (DCPR9EIX,VX)

IRIDIUM POWER SPARK PLUGS

For riders that care about performance.By using a 0.4mm diameter iridium alloy center electrode and a special ground electrode, IRIDIUM POWER realizes spark performance unseen until now.It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs.

Specifcations Include:
*A terminal nut is attached that fits with most of the world’s spark plug cables. Please remove the nut for installations that do not require one. (The terminal nuts on the IWM and IK-G types are solid parts and cannot be removed.)Built-in, Highly Reliable Resistor
*All IRIDIUM POWER plugs include a highly reliable, 5,000 ohm monolithic resistor specification to reduce electromagnetic noise that may affect electronic devices. (For all plug types)
*Highly Corrosion Resistant, Burnished Nickel PlatingThe plug housing is plated with burnished nickel, the same as plugs used for racing. It is highly resistant to corrosion and rust even while touring in continually rainy weather and during motocross events. (Low-heat range types excluded)
*360° Laser WeldingThe process used to mount the iridium tip is a highly reliable “All-around Laser Welding” process that is able to withstand all kinds of driving conditions. (For all plug types)
*Projected Center ElectrodeIn order to improve ignitability, the center electrode protrudes more than with conventional type plugs. This improves both acceleration response time and performance.(Only with: IU31, IUH24, IUH27, IX22, IX24, IX27, IUF22, IUF24, IWF22, IWF24, IWF27, IW24, IW27, IW29, IW31, and IW34)
*0.4 mm Diameter Ultra-?ne Iridium Center ElectrodeUsing a new iridium alloy with a very high melting point, the tip of the electrode can be made very fine. This enables the reduction of voltage necessary to cause the spark, and greatly improves ignitability. Moreover, the special iridium alloy used was developed by DENSO
*Taper-cut Ground ElectrodeThe tip of the ground electrode is cut to a fine taper to reduce the adverse effects of quenching, which greatly improves fuel ignitability. Also, because of the streamlined, taper-cut shape, the fuel-air mixture spreads more evenly in the gap, resulting in steady, reliable igniting of combustion.(excluding IUF27A, IUF31A, IU24A, IU27A, IU31A, IY24, IY27 & IY31)
*U-Groove Ground ElectrodeThe U-shaped groove on the ground electrode insures that the inside surface area is large enough to generate the flame kernel. This shape enables lower voltage needed to cause the spark and results in excellent ignitability without increasing the size of the spark gap. (excluding IUF27A, IUF31A, IU24A and IU31A)
*Insulator ProjectionThe projection of the insulator is optimally designed based on each plug's thermal value. This corresponds to requirements unique to thermal value, such as self-cleaning ability at lower thermal values, and heat resistance at higher thermal values. (For all plug types)

This product will suit the bikes listed below.
MakeModelYear
APRILIATuono 1000 R Factory2006,2008,2009
APRILIARSV 1000 R2005,2006,2007,2008,2009,2010,2011,2012,2013
APRILIARSV 1000 R Factory2005,2006,2007,2008,2009,2010,2011,2012,2013
APRILIATuono 1000 R2006,2007,2008,2009,2010,2011
APRILIAETV1000 Caponord2005,2006,2007,2008
APRILIASL1000 Falco2000,2001,2002,2003,2004,2005,2006,2007,2008
APRILIARST1000 Futura2001,2002,2003,2004,2005
APRILIARSV Tuono2004,2005
APRILIARSV Mille1998,1999,2000,2001,2002,2003,2004
APRILIARSV Mille R2000,2001,2002,2004
BMWK1300R2009,2010,2011,2012,2013,2014,2015,2016
BMWK1300S2009,2010,2011,2012,2013,2014,2015,2016
BMWK1300GT2009,2010,2011
BMWK1200R2005,2006,2007,2008
BMWK1200S2005,2006,2007,2008
DUCATIMonster S4R2003,2004,2005
DUCATIMonster 620 i.e.2003,2004,2005
DUCATIST4s2001,2002,2003,2004,2005
DUCATIST4S ABS2003,2004,2005
DUCATI620 Sport2003
DUCATI7481997,1998,1999,2000,2001,2002,2003
DUCATIMonster S42001,2002,2003
DUCATIST41999,2000,2001,2002,2003
DUCATI748R2000,2001,2002
DUCATI748S2000,2001,2002
DUCATI748 Biposto1995,1996,1997,1998,1999
DUCATI748 SPS1999
DUCATI748 SP1994,1995,1996,1997,1998
DUCATI916 Biposto1993,1994,1995,1996,1997,1998
DUCATI916 Monoposto1997,1998
DUCATI916 SPS1993,1997,1998
DUCATI916 Strada1993,1994,1995,1996,1997,1998
DUCATI916 SP1993,1994,1995,1996
DUCATI888 Strada1992,1993,1994
DUCATI851 Strada1989,1990,1991,1992