SHOP BY
Categories
Search Products By Bike Model
Filter
View as: grid list

ADDITIVES

  1. LM ENGINE FLUSH SHOOTER 80ML
    Engine Flush ShooterA special Oil Additive to flush and clean the oil circuits of the motor. Dissolves sludge, lacquer formers and troublesome deposits to promote proper oil flow. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. This gives the motor a “fresh start” and allows it to develop its full performance characteristics by removing old oil impurities and contaminants that would usually be left behind when doing a ‘normal’ oil change.Usage: For all 4 stroke engines. The frequency of use is dependent on the degr...
  2. LM RADIATOR STOP LEAK 125ML
    Radiator Stop LeakSpecial additive for Sealing Leaks in Radiators and Coolant Circuits. The product reliably seals hairline cracks and small leaks. Can be used preventively when repair work needs to be carried out on the cooling system.The active ingredients are suspended in the carrier fluid.Usage: For sealing minor leaks in coolant systems with and without a coolant filter. Suitable for aluminium and plastic radiators.
  3. LM FUEL SPEED ADDITIVE 80ML SHOOTER
    Speed Additive ShooterState-of-the-art Fuel Additive that increases combustion and throttle response. Speed Additive has been formulated using a combination of state-of-the-art ash-free agents, additives and fuel technologies in accordance with the requirements of today‘s engines, fuels and running conditions. It facilitates enhanced acceleration, fuel system cleaning, material-protecting properties, and promotes easier starting and smoother running.Usage: For 2-stroke and 4-stroke gasoline engines (naturally aspirated and injection). 80 ml is sufficient for up to 10 litres of fuel. Recommen...
  4. LM FUEL SPEED ADDITIVE 150ML
    Speed AdditiveState-of-the-art Fuel Additive that increases combustion and throttle response. Speed Additive has been formulated using a combination of state-of-the-art ash-free agents, additives and fuel technologies in accordance with the requirements of today‘s engines, fuels and running conditions. It facilitates enhanced acceleration, fuel system cleaning, material-protecting properties, and promotes easier starting and smoother running.Usage: For 2-stroke and 4-stroke gasoline engines (naturally aspirated and injection). 80 ml is sufficient for up to 10 litres of fuel. Recommended for...
  5. LM FUEL STABILIZER 250ML
    Fuel StabilizerA special Fuel Additive that Preserves and Protects fuel against aging and oxidation. A carefully designed set of additives to prevent corrosion throughout the entire fuel system, and greatly decrease degradation of older fuel, to increase operational reliability. Prevents problems from occurring when machines are left sitting for periods of time with old fuel in them. The product has a lasting effect.Usage: Suitable for all 4-stroke and 2-stroke gasoline engines – especially for preventive care when vehicles are rarely used. Tested for turbochargers and catalytic converters
  6. LIQUI MOLY RADIATOR CLEANER 150ML
    Radiator CleanerConcentrate for cleaning cooling circuits. Deposits in the cooling/heating system create blockages for heat exchange and they also block thermostat valves and control mechanisms. When engine temperatures are too high, the engine runs uneconomically and suffers excessive wear at considerable risk of damage. Removes deposits containing oil and lime and ensures that the engine runs reliably and at the optimum temperature. Does not contain aggressive acids or alkalis.
View as: grid list